Section 73 (Clutch System): Flywheel: Installation

WARNING: This page is about a different car, the 2006 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER

Fig 1: Installing Flywheel Using Crankshaft Stopper
Tighten the flywheel attaching bolts to the specified torque.
NOTE: Tighten the flywheel attachment bolts gradually. Each bolt should be tightened to the specified torque in crisscross order.

Tightening torque: 72 N.m (7.3 kgf-m, 52.8 ft-lb)

Fig 2: Identifying Tightening Sequence Of Flywheel Bolts
Install the clutch disc and cover. <Ref. to INSTALLATION Clutch Disc And Cover. >
Install the transmission assembly. <Ref. to INSTALLATION Manual Transmission Assembly . >