LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Forester X, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) >> Front ABS Wheel Speed Sensor >> Inspection >> Sensor Gap

Sensor Gap

  1. Measure the distance "A" between the ABS wheel speed sensor surface and sensor pole face.
    Fig 1: Identifying Distance Between ABS Wheel Speed Sensor Surface And Sensor Pole Face
    G05003745Courtesy of SUBARU OF AMERICA, INC.
  2. Measure the distance "B" between the surface where the front axle housing meets the ABS wheel speed sensor, and the tone wheel.
    NOTE: Measure so that the gauge touches the apex of the tone wheel teeth.
    Fig 2: Identifying Distance Between Surface Where Front Axle Housing Meets ABS Wheel Speed Sensor
    G05327270Courtesy of SUBARU OF AMERICA, INC.
  3. Find the gap between the ABS wheel speed sensor pole face and the surface of the tone wheel teeth by entering and calculating the measured values in the formula below.

    ABS wheel speed sensor gap = B - A 

    ABS wheel speed sensor gap standard value: 

    0.3 - 0.8 mm (0.012 - 0.031 in) 

    NOTE: If clearance is outside of the standard value, readjust by using the spacer (Part No. 26755AA000).
scientia non olet · About LEMON Manuals