LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T Control Systems >> AT Shift Lock Solenoid and "P" Range Switch >> Removal >> "P" Range Switch

"P" Range Switch

  1. Remove the console box. < Refer to REMOVAL , Console Box. >
  2. Disconnect the connector.
  3. Remove the connector from the base plate using a flat-tip screwdriver.
    Fig 1: Identifying Base Assembly Connector
    G05031915Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the terminal of "P" range switch from connector, using a flat-tip screwdriver with thin tip.
    Fig 2: Identifying Flat-Tip Screwdriver Between Terminal At Connector
    G05031950Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the clip while being careful not to break the pin, then remove the "P" range switch.
    Fig 3: Identifying Range Switch
    G05031951Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals