Rear Suspension: General Description: Specification
GENERAL SPECIFICATION
| Wheel arch height [Tolerance:+12 mm-24 mm (+0.47 in-0.94 in )] | mm (in) | 439 (17.3) |
| Camber [Tolerance: ±0°45' Difference between RH and LH 45' or less] | -0°31' | |
| Toe-in | mm (in) | 2±2 (0.08±0.08) Toe angle (sum of both wheels): 0°9'±0°9' |
| Thrust angle [Tolerance: ±0°30'] | 0° | |
| Diameter of stabilizer | mm (in) | 16 (0.63) |
NOTE:
- Front and rear toe-in and front camber can be adjusted. Adjust if the toe-in or camber tolerance exceeds specifications.
- Other items indicated in the specifications table cannot be adjusted. If other items exceed specifications, check the suspension parts and connections for deformation, and replace with new ones as required.