LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Front Arm >> Removal

Front Arm: Removal

  1. Lift-up the vehicle, and then remove the front wheels.
  2. Remove the front crossmember support plate. < Refer to REMOVAL , FRONT CROSSMEMBER SUPPORT PLATE. >
  3. Remove the front stabilizer. < Refer to REMOVAL , FRONT STABILIZER. >
  4. Remove the ball joint of front arm.
    Fig 1: Identifying Ball Joint Bolt
    G05032352Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the nut securing the front arm to crossmember. (Do not remove the bolt.)
    Fig 2: Identifying Front Arm Nut
    G05032353Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the front arm support plate.
    Fig 3: Identifying Front Arm Support Plate
    G05032354Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the bolt securing front arm to crossmember and pull the front arm out of the crossmember.
  8. To remove the stud bolt, use the ST. ST 20299AG020 STUD BOLT SOCKET
CAUTION: Do not remove the stud bolt without necessity. Always replace the parts with new ones when removed.
Fig 4: Identifying Stud Bolt
G05032355Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals