Rear Bushing

As shown in the figure below, install the rear bushing with its longer inner cylinder facing downward and the shorter facing upward, with the identification paint marking pointed down.

Fig 1: Identifying Rear Bushing Dimension
Courtesy of SUBARU OF AMERICA, INC.
Align the center of rear bushing recess portion with the aligning mark on the front arm.

Fig 2: Identifying Alignment Mark On Front Arm
Courtesy of SUBARU OF AMERICA, INC.
Using the ST and a press, install the rear bushing.
ST1 20299AG000 REMOVER

ST2 20299AG010 BASE

Fig 3: Identifying Rear Bushing

Courtesy of SUBARU OF AMERICA, INC.