Pipe Assembly: Removal

Disconnect the ground cable from the battery.
Lift-up the vehicle, and then remove the front crossmember support plate and jack-up plate.

Fig 1: Identifying Front Crossmember Support Plate And Jack-Up Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the one pipe joint at the center of the gearbox, and connect the vinyl hose to the pipe and the joint. Discharge the fluid by turning the steering wheel fully clockwise and counterclockwise. Discharge the fluid similarly from other pipes.

Fig 2: Identifying Pipes A And B
Courtesy of SUBARU OF AMERICA, INC.
Remove the clamp E from return hose and pressure hose.

Fig 3: Identifying Return Hose, Pressure Hose And Clamp E
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the pipe D from return hose and pipe C from pressure hose.

Fig 4: Identifying Pipe C, Pipe D And Pressure And Return Hoses
Courtesy of SUBARU OF AMERICA, INC.
Remove the air intake duct. < Refer to REMOVAL , Air Intake Duct. >
Disconnect the suction hose and pressure hose from oil pump.

Fig 5: Identifying Suction And Pressure Hose
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the suction hose and return hose from the reservoir tank.

Fig 6: Identifying Reservoir Tank With Suction And Return Hoses
Courtesy of SUBARU OF AMERICA, INC.
Remove the oil cooler pipe.

Fig 7: Identifying Oil Cooler Pipe
Courtesy of SUBARU OF AMERICA, INC.
Remove the hose bracket and take out the hose assembly from vehicle.

Fig 8: Identifying Hose Bracket And Hose ASSY
Courtesy of SUBARU OF AMERICA, INC.