LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H6DO) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle

Preparation For Drive Cycle

  1. Check battery voltage is more than 12 V and fuel remains half [20 to 40 l  (5.3 to 10.6 US gal, 4.4 to 8.8 Imp gal)].
  2. After performing the diagnostics and clearing the memory, check for any remaining unresolved trouble data. <Ref. to CLEAR MEMORY MODE . >
  3. Disconnect the test mode connector.
    NOTE:
    • Perform the diagnosis after warming up the engine except when the engine coolant temperature at starting is specified.
    • Perform the diagnosis twice if the DTC marked with *. After completing the first diagnosis, stop the engine and perform second diagnosis in same condition.
scientia non olet · About LEMON Manuals