LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H6DO) >> Drive Cycle >> Procedure >> Drive Cycle F

Drive Cycle F

  1. Check that the engine coolant temperature at engine start is 30°C (86°F) or less.
  2. Start the engine, and warm it up until engine coolant temperature increases over 95°C (203°F).
  3. After the engine has reached the state of procedure 2), idle the engine for 10 minutes or more.
    NOTE: Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
    DTC CHART

    DTC Item On condition
    P0111 Intake Air Temperature Circuit Range/Performance -
scientia non olet · About LEMON Manuals