LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H6DO) >> Drive Cycle >> Procedure >> Drive Cycle E

Drive Cycle E

  1. Check that the battery voltage is over 10.9 V.
  2. Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE . >
  3. Drive for approximately 30 (7.9 US gal, 6.6 Imp gal) of fuel.
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
    DTC CHART

    DTC Item On condition
    P0461 Fuel Level Sensor Circuit Range/Performance -