LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Variable Valve Lift Diagnosis Oil Pressure Switch >> Removal

Variable Valve Lift Diagnosis Oil Pressure Switch: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
  3. Remove the air intake chamber. <Ref. to REMOVAL , Air Intake Chamber .>
  4. Disconnect the connector from variable valve lift diagnosis oil pressure switch.
  5. Remove the variable valve lift diagnosis oil pressure switch.
    • LH side
      Fig 1: Identifying Variable Valve Lift Diagnosis Oil Pressure Switch Connector LH
      G05018466Courtesy of SUBARU OF AMERICA, INC.
    • RH side
      Fig 2: Identifying Variable Valve Lift Diagnosis Oil Pressure Switch Connector RH
      G05018467Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals