Propeller Shaft: Installation

Insert the sleeve yoke into the transmission and attach center bearing to body.
Tightening torque: 52 N.m (5.3 kgf-m, 38.3 ft-lb)

Fig 1: Identifying Bolts Which Hold Center Bearing To Vehicle Body
Courtesy of SUBARU OF AMERICA, INC.
Align the matching marks and connect the flange yoke and rear differential.
Tightening torque: 31 N.m (3.2 kgf-m, 23.1 ft-lb)

Fig 2: Identifying Matching Marks On Flange Yoke And Rear Differential
Courtesy of SUBARU OF AMERICA, INC.
Install the heat shield cover.
Install the center exhaust pipe.
Install the rear exhaust pipe and muffler.
Lower the vehicle.
Connect the ground cable to the battery.