LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Impact Sensor >> Removal

Impact Sensor: Removal

  1. Remove the key from ignition switch.
  2. Close all doors and the rear gate.
  3. Press the UNLOCK button of the keyless transmitter.
  4. Change the setting of impact sensor using Subaru Select Monitor.
  5. Disconnect the ground cable from battery.
  6. Remove the impact sensor.
scientia non olet · About LEMON Manuals