Tire Rotation: Inspection

When the tread has worn down to 1.6 mm (2/32 in) or the wear indicator appears across the tread, replace the tire. (Replace the right and left tire as a set.)
If the tire appears to be worn unevenly, adjust the wheel alignment.
Next, make a tire rotation between front and rear as shown in the figure, make sure tires are worn evenly.

Fig 1: Identifying Tire Rotation

Fig 2: Identifying Tire Inspection
Re-register the transmitter ID when rotation was performed. (3.0 L U4 model) < Ref. to REGISTER TRANSMITTER ID , OPERATION, Subaru Select Monitor. >