LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Airbag System) >> Roll Connector >> Removal

Roll Connector: Removal

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect the ground cable from the battery, and wait for at least 20 seconds before starting work.
  3. Remove instrument panel lower cover.
  4. Disconnect airbag connector (AB3) and (AB8) below steering column.
    Fig 1: Identifying Airbag Connectors
    G04991328Courtesy of SUBARU OF AMERICA, INC.
  5. Remove driver's airbag module. < Ref. to DRIVER'S AIRBAG MODULE . >
  6. Remove steering wheel. < Ref. to REMOVAL , Steering Wheel . >
  7. Remove steering column cover.
  8. Remove screws, and then remove roll connector.
    Fig 2: Locating Roll Connector Screws
    G04991329Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals