Main Harness: Removal

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect the ground cable from the battery and wait for at least 20 seconds before starting work.
Remove instrument panel. < Ref. to REMOVAL , INSTRUMENT PANEL ASSEMBLY. >
Disconnect connector from airbag control module.

Fig 1: Identifying Airbag Connector
Courtesy of SUBARU OF AMERICA, INC.
Disconnect front sub sensor connector (blue) from airbag main harness.

Fig 2: Identifying Front Sub Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.
Detach clips (A) from steering support beam, and remove main harness.

Fig 3: Identifying Clips And Main Harness
Courtesy of SUBARU OF AMERICA, INC.