LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Automatic Transmission) >> Reduction Driven Gear >> Removal >> VTD Model

VTD Model

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from the vehicle. < Ref. to REMOVAL . >
  2. Remove rear vehicle speed sensor, and separate the transmission case and extension case. < Ref. to REMOVAL . >
  3. Remove the rear drive shaft. < Ref. to REMOVAL . >
  4. Set the range select lever to "P".
  5. Straighten the staked portion, and remove the lock nut.
    Fig 1: Removing Lock Nut
    G04990479Courtesy of SUBARU OF AMERICA, INC.
  6. Using the ST1 and ST2, extract the reduction driven gear.

    ST1 499737000 PULLER

    ST2 899524100 PULLER SET

  7. Pull out the center differential assembly. < Ref. to REMOVAL . >
scientia non olet · About LEMON Manuals