LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4SO) >> 6. Camshaft Position Sensor >> A: Removal

A: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Identifying Ground Cable From Battery
    G05019586
  2. Disconnect the connector from camshaft position sensor.
    Fig 2: Identifying Camshaft Position Sensor Connector
    G04997339
  3. Remove the bolt which installs camshaft position sensor to support.
    Fig 3: Locating Camshaft Position Sensor
    G04997389
  4. Remove the bolt which installs camshaft position sensor support to camshaft cap LH.
    Fig 4: Locating Camshaft Position Sensor Support Bolts
    G04997390
  5. Remove the camshaft position sensor and the support as a unit.
  6. Remove the camshaft position sensor from the support.
    Fig 5: Identifying Camshaft Position Sensor And Camshaft Position Sensor Support
    G04997391
scientia non olet · About LEMON Manuals