LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4SO) >> 5. Crankshaft Position Sensor >> A: Removal

A: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Identifying Ground Cable From Battery
    G05019586
  2. Remove the generator. < Ref. to REMOVAL , Generator. >
  3. Remove the bolt which installs crankshaft position sensor to cylinder block.
    Fig 2: Identifying Crankshaft Position Sensor
    G04997337
  4. Remove the crankshaft position sensor, and then disconnect the connector from it.
    Fig 3: Disconnecting Connector
    G04997386
scientia non olet · About LEMON Manuals