LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4SO) >> 24.Fuel Pump >> A: Removal

A: Removal

WARNING:
  • Place "NO FIRE" signs near the working area.
  • Be careful not to spill fuel.
NOTE: Fuel pump assembly consists of fuel pump and fuel level sensor.
  1. Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
  2. Drain fuel. < Ref. to DRAINING FUEL , PROCEDURE, Fuel. >
  3. Remove the rear seat.
  4. Remove the service hole cover.
    Fig 1: Locating Service Hole Cover Of Fuel Pump
    G05016863
  5. Disconnect the connector from fuel pump.
    Fig 2: Locating Connector From Fuel Pump
    G05016921
  6. Disconnect the quick connector, then disconnect the fuel delivery hose and jet pump hose. < Ref. to REMOVAL , Fuel Delivery and Evaporation Lines. >
  7. Remove the nuts which install fuel pump assembly onto fuel tank.
    Fig 3: Identifying Delivery Hose And Jet Pump Hose
    G05016922
  8. Remove the fuel pump assembly from the fuel tank.
scientia non olet · About LEMON Manuals