LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4SO) >> 16.Rear Oxygen Sensor >> A: Removal

A: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Identifying Ground Cable From Battery
    G05019586
  2. Remove the clip fastening the harness and disconnect the rear oxygen (A/F) sensor connector.
    Fig 2: Identifying Front Oxygen (A/F) Sensor Connector And Rear Oxygen Sensor Connector
    G05016843
  3. Lift-up the vehicle.
  4. Remove the under cover.
  5. Apply spray-type lubricant to the threaded portion of rear oxygen sensor, and leave it for one minute or more.
  6. Remove the rear oxygen sensor.
    CAUTION: When removing the rear oxygen (A/F) sensor, wait until exhaust pipe cools, because it can damage the exhaust pipe.
    Fig 3: Identifying Front Oxygen (A/F) Sensor And Rear Oxygen Sensor
    G05016844
scientia non olet · About LEMON Manuals