Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.

Using the ST, install the parking gear.
ST 499755602 PRESS

Fig 1: Identifying Parking Gear
Install the snap ring.

Fig 2: Identifying Snap Ring
Install the new ball bearing to reduction driven gear using press.
ST 18654AA000 INSTALLER

Fig 3: Identifying Ball Bearing To Reduction Driven Gear
Install the ball bearing on the reverse side with the same procedure as step 3).
ST 18654AA000 INSTALLER

Fig 4: Identifying Ball Bearing On Reverse Side