LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Automatic Transmission 5AT) >> Front Differential Assembly >> Disassembly >> Differential Case Assembly

Differential Case Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the taper roller bearing using the ST and a press.

    ST 498077000 REMOVER

    Fig 1: Identifying Taper Roller Bearing
    G05002714
  2. Secure the case in a vise, remove the hypoid driven gear tightening bolts, and then separate the hypoid driven gear into case (RH) and case (LH).
    Fig 2: Identifying Hypoid Driven Gear And Differential Case
    G05022375
  3. Pull out the straight pin and shaft, and then remove the differential bevel gear, washer and differential bevel pinion.
    Fig 3: Identifying Differential Case
    G05022376
scientia non olet · About LEMON Manuals