LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Front Suspension) >> Front Transverse Link >> Assembly >> Rear Bushing

Rear Bushing

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear bushing to transverse link and align aligning marks scribed on the two.
  2. Tighten self-locking nut.
CAUTION:
  • When self-locking nut is removed, replace with a new one.
  • While holding rear bushing so as not to change position of aligning marks, tighten self-locking nut.

Tightening torque: 

186 N.m (19.0 kgf-m, 137 ft-lb) 

scientia non olet · About LEMON Manuals