Oil Pump: Installation

Install in the reverse order of removal.

Perform the following.

1. Apply liquid gasket to the mating surfaces of oil pump.

   Liquid gasket: 

   THREE BOND 1215 (Part No. 004403007) or equivalent 

   Fig 1: Applying Liquid Gasket To Matching Surfaces Of Oil Pump

   
2. Replace O-ring (A) with a new part.
3. Apply a coat of engine oil to the inside of oil seal.
   Fig 2: Applying Coat Of Engine Oil To Inside Of Oil Seal

   
4. Position the oil pump, aligning the notched area with crankshaft, and push the oil pump straight.
   CAUTION:

   • Make sure the oil seal lip is not folded.
   • Be careful not to scratch the oil seal when installing oil pump on cylinder block.
5. Install the oil pump.
6. Apply liquid gasket to the three bolts thread.

   Liquid gasket: 

   THREE BOND 1324 (Part No. 004403042) or equivalent 

   Tightening torque: 

   6.4 N.m (0.65 kgf-m, 4.7 ft-lb) 

   Fig 3: Applying Liquid Gasket To Bolts Thread