LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Entry System >> Inspection >> Check Horn Operation

Check Horn Operation

HORN OPERATION CHECKING PROCEDURE CHART

Step Check Yes No
1 CHECK HORN OPERATION. 
Make sure the horn sounds when the horn switch is pushed.		 Does the horn sound? Go to step 2.  Check the horn circuit.
2 CHECK HORN OPERATION. 
  1. Disconnect the harness connector of body integrated unit.
  2. Connect the harness connector terminal to ground using a suitable lead wire.

    Connector & terminal 

    (B280) No. 11 (+) - Chassis ground (-): 

 Does the horn sound? Check the body integrated unit. < Ref. to BASIC DIAGNOSTIC PROCEDURE . > Check the harness for open circuits and/or shorts between the body integrated unit and horn relay.
scientia non olet · About LEMON Manuals