LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback XT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Automatic Transmission) >> Reduction Driven Gear >> Installation >> MPT Model

MPT Model

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the select lever to "P" range.
  2. Using a plastic hammer, install reduction driven gear assembly and new washer, and tighten new drive pinion lock nut.

    Tightening torque: 100 N.m (10.2 kgf-m, 73.8 ft-lb) 

    Fig 1: Identifying Reduction Driven Gear
    G04990480Courtesy of SUBARU OF AMERICA, INC.
  3. After tightening, stake the lock nut securely.
  4. Combine the transmission case with the extension case, and install rear vehicle speed sensor. < Ref. to INSTALLATION . >
  5. Install the transmission assembly to vehicle. < Ref. to INSTALLATION . >
scientia non olet · About LEMON Manuals