Dropping Resistor: Removal

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Dropping resistor is installed only for NON-TURBO model.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the air intake duct.
< Ref. to REMOVAL , AIR CLEANER CASE. >
Disconnect the connector from dropping resistor.
Remove the dropping resistor.

Fig 2: Identifying Dropping Resistor
Courtesy of SUBARU OF AMERICA, INC.