LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback XT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Automatic Transmission) >> Dropping Resistor >> Inspection

Dropping Resistor: Inspection

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
RESISTOR REFERENCE

Step Check Yes No
1 CHECK RESISTOR. 
  1. Turn ignition switch to OFF.
  2. Disconnect the connector from dropping resistor.
  3. Measure the resistance between dropping resistor terminals.

    Terminals No. 1 - No. 2: 

 Is the resistance 9 - 15 Ω? Go to step 2.  Replace the dropping resistor. < Ref. to DROPPING RESISTOR . >
2 CHECK RESISTOR. 
Measure the resistance between dropping resistor terminals.
Terminals No. 3 - No. 4: 		 Is the resistance 9 - 15 Ω? Dropping resistor is normal. Replace the dropping resistor. < Ref. to DROPPING RESISTOR . >
scientia non olet · About LEMON Manuals