LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback XT, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubrication (H4DOTC) >> Oil Pressure Switch >> Installation

Oil Pressure Switch: Installation

  1. Apply liquid gasket to the oil pressure switch threads.

    Liquid gasket: 

    THREE BOND 1324 (Part No. 004403007) or equivalent 

    Fig 1: Applying Liquid Gasket To Oil Pressure Switch Threads
    G04997913
  2. Install the oil pressure switch onto engine block.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb) 

    Fig 2: Identifying Oil Pressure Switch
    G04997912
  3. Connect the terminal to the oil pressure switch.
    Fig 3: Identifying Oil Pressure Switch Terminal
    G04997911
  4. Install the generator to bracket. < Ref. to INSTALLATION , Generator. >
  5. Install the collector cover.
scientia non olet · About LEMON Manuals