LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback XT, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4DOTC) >> Manifold Absolute Pressure Sensor >> Removal

Manifold Absolute Pressure Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Removing Collector Cover
    G05019586
  3. Disconnect the connector from manifold absolute pressure sensor (A), and remove the filter assembly (B) from intake manifold.
  4. Remove the manifold absolute pressure sensor from the solenoid valve bracket.
    Fig 2: Locating Manifold Absolute Pressure Sensor From Solenoid Valve Bracket Bolt
    G05017812
scientia non olet · About LEMON Manuals