LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback XT Limited, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Differentials >> General Description >> Preparation Tool >> Special Tool

Special Tool

SPECIAL TOOL CHART

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
Fig 1 398477701 HANDLE Used for installing front and rear bearing cone.
Fig 2 398477702 DRIFT
  • Used for press-fitting the bearing cone of differential carrier (front).
  • For T-type
Fig 3 398217700 ATTACHMENT SET Stand for rear differential carrier disassembly and assembly.
Fig 4 498447120 INSTALLER Used for installing front oil seal.
Fig 5 498427200 FLANGE WRENCH Used for stopping rotation of companion flange when removing and tightening self-locking nut.
Fig 6 398467700 DRIFT
  • Used for removing pinion, pilot bearing and front bearing cone.
  • For T-type and VA1 -type
Fig 7 399780104 WEIGHT Used for installing front bearing cone and pilot bearing companion flange.
Fig 8 899580100 INSTALLER Used for press-fitting front bearing cone and pilot bearing.
Fig 9 899904100 STRAIGHT PIN REMOVER Used for driving out differential pinion shaft lock pin.
Fig 10 498247001 MAGNET BASE
  • Used for measuring backlash between side gear and pinion, and hypoid gear.
  • Used with DIAL GAUGE (498247100).
Fig 11 498247100 DIAL GAUGE
  • Used for measuring backlash between side gear and pinion, and hypoid gear.
  • Used with MAGNET BASE (498247001).
Fig 12 398507704 BLOCK
  • Used for adjusting pinion height and preload.
  • For T-type and VA1 -type
Fig 13 398177700 INSTALLER
  • Used for installing rear bearing cone.
  • For T-type and VA2-type
Fig 14 398457700 ATTACHMENT
  • Used for removal of side bearing retainer.
  • For T-type
Fig 15 398477703 DRIFT 2
  • Used for press-fitting bearing race (rear) of differential carrier.
  • For T-type and VA2-type
Fig 16 398437700 DRIFT
  • Used for installing side oil seal.
  • For T-type and VA2-type
Fig 17 398507702 DUMMY SHAFT
  • Used for adjusting pinion height and preload.
  • For T-type
Fig 18 398507703 DUMMY COLLAR
  • Used for adjusting pinion height and preload.
  • For T-type
Fig 19 398517700 REPLACER
  • Used for removing rear bearing cone.
  • For T-type and VA2-type
Fig 20 398487700 DRIFT
  • Used for press-fitting side bearing cone.
  • For T-type and VA2-type
Fig 21 398507701 DIFFERENTIAL CARRIER GAUGE
  • Used for adjusting pinion height.
  • For T-type
Fig 22 398527700 PULLER ASSY
  • Used for removing front oil seal.
  • Used for removing side bearing cup. (T-type)
Fig 23 28099PA090 OIL SEAL PROTECTOR
  • Used for installing the rear drive shaft to rear differential.
  • For oil seal protection
Fig 24 28099PA100 DRIVE SHAFT REMOVER
  • Used for removing rear drive shaft from rear differential.
  • For T-type
Fig 25 399703600 PULLER ASSY Used for removing companion flange.
Fig 26 899874100 INSTALLER Used for installing companion flange.
Fig 27 498077000 REMOVER
  • Used for removing side bearing cone from differential.
  • For VA2-type
Fig 28 899864100 REMOVER Used for removing differential side bearing.
Fig 29 499277200 INSTALLER
  • Used for installing front bearing cone.
  • For VA2-type
Fig 30 18758AA000 PULLER
  • Used for removing side bearing cup.
  • For VA2-type
Fig 31 18759AA000 PULLER ASSY
  • Used for removing differential from side bearing cone.
  • For T-type
Fig 32 18678AA000 (Newly adopted tool) DUMMY SHAFT
  • Used for adjusting pinion height and preload.
  • For VA2-type
Fig 33 18831AA010 (Newly adopted tool) DIFFERENTIAL CARRIER GAUGE
  • Used for adjusting pinion height.
  • For VA2-type
Fig 34 18630AA010 (Newly adopted tool) WRENCH ASSY
  • Used for removing and installing side oil seal holder.
  • For VA2-type
NOTE: Also available for VA1-type.
Fig 35 498175500 INSTALLER
  • Used for installing rear bearing cone.
  • For VA1-type
Fig 36 499785500 WRENCH ASSY
  • Used for removing and installing side oil seal holder.
  • For VA1-type
Fig 37 498447100 INSTALLER
  • Used for installing oil seal.
  • For VA1-type and T-type
Fig 38 399520105 SEAT
  • Used for removing side bearing cone.
  • Used with PULLER SET (899524100).
  • For VA-type
Fig 39 498485400 DRIFT
  • Used for installing side bearing cone.
  • For VA1-type
Fig 40 498505501 DIFFERENTIAL CARRIER GAUGE
  • Used for adjusting pinion height.
  • For VA1-type
Fig 41 498447110 DRIFT
  • Used for press-fitting the bearing race (front) of differential carrier.
  • For VA1-type
Fig 42 498447150 DUMMY SHAFT
  • Used for adjusting pinion height and preload.
  • For VA1-type
Fig 43 899524100 PULLER SET Used for removing side bearing corn of differential.
  1. Puller
  2. Cap
Fig 44 498515500 REPLACER
  • Used for removing rear bearing cone.
  • For VA1-type
Fig 45 32285AA000 DUMMY COLLAR
  • Used for adjusting pinion height and preload.
  • For VA1-type
Fig 46 499705404 SEAT
  • Used for removing side bearing race.
  • Used with PULLER ASSY (499705401).
  • For VA1-type
Fig 47 499705401 PULLER ASSY
  • Used for removing side bearing race.
  • Used with SEAT (499705404).
  • For VA-type
Fig 1: Identifying Special Tool ST-398477701
G03832415Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Identifying Special Tool ST-398477702
G03832416Courtesy of SUBARU OF AMERICA, INC.
Fig 3: Identifying Special Tool ST-398217700
G03832417Courtesy of SUBARU OF AMERICA, INC.
Fig 4: Identifying Special Tool ST-498447120
G03832418Courtesy of SUBARU OF AMERICA, INC.
Fig 5: Identifying Special Tool ST-498427200
G03832419Courtesy of SUBARU OF AMERICA, INC.
Fig 6: Identifying Special Tool ST-398467700
G03832420Courtesy of SUBARU OF AMERICA, INC.
Fig 7: Identifying Special Tool ST-399780104
G03832421Courtesy of SUBARU OF AMERICA, INC.
Fig 8: Identifying Special Tool ST-899580100
G03832422Courtesy of SUBARU OF AMERICA, INC.
Fig 9: Identifying Special Tool ST-899904100
G03832423Courtesy of SUBARU OF AMERICA, INC.
Fig 10: Identifying Special Tool ST-498247001
G03832424Courtesy of SUBARU OF AMERICA, INC.
Fig 11: Identifying Special Tool ST-498247100
G03832425Courtesy of SUBARU OF AMERICA, INC.
Fig 12: Identifying Special Tool ST-398507704
G03832426Courtesy of SUBARU OF AMERICA, INC.
Fig 13: Identifying Special Tool ST-398177700
G03832427Courtesy of SUBARU OF AMERICA, INC.
Fig 14: Identifying Special Tool ST-398457700
G03832428Courtesy of SUBARU OF AMERICA, INC.
Fig 15: Identifying Special Tool ST-398477703
G03832429Courtesy of SUBARU OF AMERICA, INC.
Fig 16: Identifying Special Tool ST-398437700
G03832430Courtesy of SUBARU OF AMERICA, INC.
Fig 17: Identifying Special Tool ST-398507702
G03832431Courtesy of SUBARU OF AMERICA, INC.
Fig 18: Identifying Special Tool ST-398507703
G03832432Courtesy of SUBARU OF AMERICA, INC.
Fig 19: Identifying Special Tool ST-398517700
G03832433Courtesy of SUBARU OF AMERICA, INC.
Fig 20: Identifying Special Tool ST-398487700
G03832434Courtesy of SUBARU OF AMERICA, INC.
Fig 21: Identifying Special Tool ST-398507701
G03832435Courtesy of SUBARU OF AMERICA, INC.
Fig 22: Identifying Special Tool ST-398527700
G03832436Courtesy of SUBARU OF AMERICA, INC.
Fig 23: Identifying Special Tool ST-28099PA090
G03832437Courtesy of SUBARU OF AMERICA, INC.
Fig 24: Identifying Special Tool ST28099PA100
G03832438Courtesy of SUBARU OF AMERICA, INC.
Fig 25: Identifying Special Tool ST-399703600
G03832439Courtesy of SUBARU OF AMERICA, INC.
Fig 26: Identifying Special Tool ST-899874100
G03832440Courtesy of SUBARU OF AMERICA, INC.
Fig 27: Identifying Special Tool ST-498077000
G03832441Courtesy of SUBARU OF AMERICA, INC.
Fig 28: Identifying Special Tool ST-899864100
G03832442Courtesy of SUBARU OF AMERICA, INC.
Fig 29: Identifying Special Tool ST-499277200
G03832443Courtesy of SUBARU OF AMERICA, INC.
Fig 30: Identifying Special Tool ST18758AA000
G03832444Courtesy of SUBARU OF AMERICA, INC.
Fig 31: Identifying Special Tool ST18759AA000
G03832445Courtesy of SUBARU OF AMERICA, INC.
Fig 32: Identifying Special Tool ST18678AA000
G03832446Courtesy of SUBARU OF AMERICA, INC.
Fig 33: Identifying Special Tool ST18831AA010
G03832447Courtesy of SUBARU OF AMERICA, INC.
Fig 34: Identifying Special Tool ST-18630AA010
G03832448Courtesy of SUBARU OF AMERICA, INC.
Fig 35: Identifying Special Tool ST-498175500
G03832449Courtesy of SUBARU OF AMERICA, INC.
Fig 36: Identifying Special Tool ST-499785500
G03832450Courtesy of SUBARU OF AMERICA, INC.
Fig 37: Identifying Special Tool ST-498447100
G03832451Courtesy of SUBARU OF AMERICA, INC.
Fig 38: Identifying Special Tool ST-399520105
G03832452Courtesy of SUBARU OF AMERICA, INC.
Fig 39: Identifying Special Tool ST-498485400
G03832453Courtesy of SUBARU OF AMERICA, INC.
Fig 40: Identifying Special Tool ST-498505501
G03832454Courtesy of SUBARU OF AMERICA, INC.
Fig 41: Identifying Special Tool ST-498447110
G03832455Courtesy of SUBARU OF AMERICA, INC.
Fig 42: Identifying Special Tool ST-498447150
G03832456Courtesy of SUBARU OF AMERICA, INC.
Fig 43: Identifying Special Tool ST-899524100
G03832457Courtesy of SUBARU OF AMERICA, INC.
Fig 44: Identifying Special Tool ST-498515500
G03832458Courtesy of SUBARU OF AMERICA, INC.
Fig 45: Identifying Special Tool ST-32285AA000
G03832459Courtesy of SUBARU OF AMERICA, INC.
Fig 46: Identifying Special Tool ST-499705404
G03832460Courtesy of SUBARU OF AMERICA, INC.
Fig 47: Identifying Special Tool ST-499705401
G03832461Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals