LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> Rear Drive Shaft >> Removal

Rear Drive Shaft: Removal

  1. Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the rear vehicle speed sensor, and then remove the extension case. < Ref. to REMOVAL , Extension Case. >
  3. Pull out the rear driveshaft from center differential assembly.
    Fig 1: Identifying Drive Gear And Center Differential Assembly
    G05022299
  4. Remove the drive plate and driven plate.