LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> Rear Drive Shaft >> Installation

Rear Drive Shaft: Installation

  1. Select the shim. < Ref. to ADJUSTMENT , Transfer Clutch. >
  2. Install drive plate and driven plate.
  3. Insert the rear driveshaft into the center differential assembly.
  4. Combine the extension case, and then install the rear vehicle speed sensor. < Ref. to INSTALLATION , Extension Case. >
  5. Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
scientia non olet · About LEMON Manuals