LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> Drive Pinion Shaft Assembly >> Removal

Drive Pinion Shaft Assembly: Removal

  1. Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Pull out the torque converter assembly. < Ref. to REMOVAL , Torque Converter Assembly. >
  3. Remove the transmission harness connector from stay.
  4. Disconnect the air breather hose. < Ref. to REMOVAL , Air Breather Hose. >
  5. Remove the oil charge pipe. < Ref. to REMOVAL , Oil Charge Pipe. >
  6. Remove the ATF filter inlet and outlet pipes. < Ref. to REMOVAL , ATF Filter. >
  7. Separate the converter case and transmission case. < Ref. to REMOVAL , Converter Case. >
  8. Remove the drive pinion shaft mounting bolts, and then remove the drive pinion shaft assembly from oil pump cover.
    Fig 1: Identifying Drive Pinion Shaft Assembly From Oil Pump Cover
    G05022351
  9. Remove the oil pump cover from AT main case. < Ref. to OIL PUMP COVER . >
scientia non olet · About LEMON Manuals