LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> Drive Pinion Shaft Assembly >> Disassembly

Drive Pinion Shaft Assembly: Disassembly

  1. Remove the crimped part of the lock nut, and then remove the lock nut while holding the rear spline part of the shaft using ST1 and ST2. Pull out the drive pinion collar.

    ST1 18667AA010 HOLDER

    ST2 499787700 WRENCH

    ST3 499787500 ADAPTER

    Fig 1: Pulling Drive Pinion Collar
    G05002688
  2. Remove the O-ring.
  3. Separate the roller bearing and outer race from shaft using a press.
    Fig 2: Identifying O-ring
    G05022354
  4. Separate the front roller bearing from shaft using a press and ST.

    ST 498517000 REPLACER

    Fig 3: Identifying Front Roller Bearing From Shaft
    G05022355
scientia non olet · About LEMON Manuals