Clutch Switch: Adjustment

WARNING: This page is about a different variant/trim than selected.

Loosen the lock nut of clutch switch (clutch start).

Fig 1: Loosening Lock Nut Of Clutch Switch (Clutch Start)
Fully depress the clutch and hold it.
Adjust the gap of the clutch pedal plate and the clutch switch to be 2 - 2.5 mm (0.08 - 0.10 in).

Fig 2: Identifying Gap Between Clutch Pedal Plate And Clutch Switch
Tighten the lock nut.
Tightening torque:

8 N.m (0.8 kgf-m, 5.8 ft-lb)