LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586
  3. Remove the generator harness from fuel pipe protector LH.
  4. Remove the fuel pipe protector LH.
    Fig 2: Locating Fuel Pipe Protector LH Bolts
    G05018408
  5. Disconnect the connector from camshaft position sensor LH.
    Fig 3: Locating Camshaft Position Sensor LH Connector
    G05018443
  6. Remove the camshaft position sensor LH.
    Fig 4: Locating Camshaft Position Sensor LH
    G05018444
  7. Remove the camshaft position sensor RH in the same procedure as LH.
scientia non olet · About LEMON Manuals