Check Body Integrated Unit Power Supply And Ground Circuit

BODY INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT CHECKING PROCEDURE CHART

Step	Check	Yes	No
1 CHECK POWER SUPPLY OF BODY INTEGRATED UNIT. Disconnect the harness connector of body integrated unit. Measure the voltage between harness connector terminal and chassis ground. Connector & terminal (B280) No. 7 (+) - Chassis ground (-): (B281) No. 2 (+) - Chassis ground (-):	Is the voltage more than 10 V?	Go to step 2.	Check the harness for open or short between body integrated unit and fuse.
2 CHECK BODY INTEGRATED UNIT GROUND CIRCUIT. Disconnect the harness connector of body integrated unit. Measure the resistance between harness connector terminal and chassis ground. Connector & terminal (B280) No. 22 - Chassis ground: (B281) No. 8 - Chassis ground: (B281) No. 9 - Chassis ground:	Is the resistance less than 10 Ω?	Check the body integrated unit. < Ref. to BASIC DIAGNOSTIC PROCEDURE . >	Repair the harness.