LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (STI) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the bolt which installs the crankshaft position sensor to cylinder block.
    Fig 1: Identifying Crankshaft Position Sensor
    G04997337
  3. Remove the crankshaft position sensor, and disconnect the connector from it.
    Fig 2: Identifying Crankshaft Position Sensor
    G04997386
scientia non olet · About LEMON Manuals