Electrical Specification
CAUTION:
- The occupant detection control module, load cell sensor and seat frame are integrated, therefore, do not remove them.
- It is prohibited to measure the occupant detection control module I/O signal. Therefore, terminal No. is not shown here.
TERMINALS REFERENCE
| Terminal Name | Input/Output value | Remarks | |
|---|---|---|---|
| IG - Power supply | 9 - 16 V | When ignition switch ON | |
| Airbag control module communication | (COM) | Open collector terminal | Communication line |
| Airbag control module communication | (GND) | 0 V | Ground |
| Belt tension sensor | (Vcc) | 0 - 5V | Belt tension sensor power supply |
| (Vout) | 0.5 - 4.5 V | Sensor output voltage | |
| (GND) | 0 V | Sensor ground | |