LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Window/Mirrors >> Windshield Glass >> Removal >> Using Windshield Knife

Using Windshield Knife

  1. Disconnect the wiper deicer connector. (Model with wiper deicer)
  2. Remove the cowl panel. < Ref. to REMOVAL , Cowl Panel. >
  3. Remove the glass molding.
  4. Tape the body side of the circumference of windshield glass for protection.
  5. Apply sufficient amount of soapy water to the adhesive layer.
  6. Insert the windshield knife into the adhesive layer.
  7. While holding the knife edge and windshield glass edge at a right angle, move the windshield knife in parallel to the windshield glass edge along face and edge of windshield glass to cut the adhesive layer.
    NOTE:
    • Do not twist the windshield knife.
    • Cutting of adhesive layer shall be started with wider gap between windshield glass and body.
      Fig 1: Removing Roof Molding And Upper Front Molding
      G05004257
    • Because the locating pins are bonded to corners of glass, use piano wire to cut the pin.
      Fig 2: Locating Pins Bonded To Corners Glass
      G05004258
scientia non olet · About LEMON Manuals