LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Window/Mirrors >> Windshield Glass >> Removal >> Using Piano Wire

Using Piano Wire

  1. Disconnect the wiper deicer connector. (Model with wiper deicer)
  2. Remove the cowl panel. < Ref. to REMOVAL , Cowl Panel. >
  3. Remove the glass molding.
  4. Tape the body side of circumference of windshield glass for protection.
  5. Make a hole in adhesive layer using a drill or knife.
  6. Pass the piano wire through hole, and attach securely both the piano wire ends to pieces of wood.
    Fig 1: Removing Roof Molding And Upper Front Molding
    G05004259
  7. Pull the wire ends alternately to cut off the adhesive layer.
    CAUTION:
    • Do not tightly pull the piano wire against the windshield glass edge.
    • Be careful not to damage the interior and exterior parts.
    • Do not cross piano wires. Otherwise they may be cut.
    • After removing the area near instrument panel, attach a protection plate to it. Use extreme care when removing.
scientia non olet · About LEMON Manuals