LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Forester XT Limited, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4DOTC) >> Fuel Pump >> Removal

Fuel Pump: Removal

WARNING:
  • Place "NO FIRE" signs near the working area.
  • Be careful not to spill fuel.
NOTE: Fuel pump assembly consists of fuel pump and fuel level sensor.
  1. Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE  PROCEDURE, FUEL.>
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Battery Ground Cable
    G04988132
  3. Open the fuel filler flap lid, and remove the fuel filler cap.
  4. Lift-up the vehicle.
  5. Drain fuel from fuel tank. <Ref. to PROCEDURE  FUEL.>
  6. Remove the luggage floor mat. <Ref. to REMOVAL Luggage Floor Mat.>
  7. Remove the service hole cover.
    Fig 2: Locating Service Hole Cover
    G04997472
  8. Disconnect the connector from fuel pump.
    Fig 3: Locating Fuel Pump Connector
    G04998455
  9. Disconnect the quick connector and then disconnect the fuel delivery hose and return hose. <Ref. to REMOVAL  FUEL DELIVERY, RETURN AND EVAPORATION LINES. >
  10. Move the clips, and disconnect the jet pump hose (A).
    Fig 4: Identifying Jet Pump Hose
    G04998456
  11. Remove the nuts which install fuel pump assembly onto fuel tank.
    Fig 5: Locating Nuts Installing Fuel Pump Assembly Onto Fuel Tank
    G04998457
  12. Remove the fuel pump assembly from the fuel tank.
scientia non olet · About LEMON Manuals