RH Side

Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE PROCEDURE, FUEL.>
Disconnect the ground cable from battery.

Fig 1: Disconnecting Battery Ground Cable
Open the fuel filler flap lid, and remove the fuel filler cap.
Remove the collector cover.
Remove the air cleaner upper cover and air intake boot. <Ref. to REMOVAL Air Cleaner Case.>
Remove the air cleaner element.
Remove the coolant filler tank.
<Ref. to REMOVAL Coolant Filler Tank.>
Remove the power steering pump.
1. Remove the front side of the V-belts. <Ref. to REMOVAL V-belt.>
2. Disconnect the power steering switch connector.
  
  Fig 2: Locating Power Steering Switch Connector
3. Remove the bolts which install the power steering pipe bracket to the intake manifold.
  NOTE: Do not disconnect the power steering hose.
  
  Fig 3: Locating Bolts Securing Power Steering Pipe Brackets To Intake Manifold
4. Remove the bolts, which install power steering pump bracket.
  
  Fig 4: Locating Power Steering Pump Bracket Bolts
5. Remove the reservoir tank from the bracket by pulling it upward.
  
  Fig 5: Locating Bracket
6. Place the power steering pump on the right side wheel apron.
  
  Fig 6: Identifying Power Steering Pump On Right Side Wheel Apron
Remove the fuel pipe protector RH.

Fig 7: Locating Fuel Pipe Protector With Bolts (RH)
Disconnect the connector from fuel injector.

Fig 8: Locating Fuel Injector Connectors
Remove the bolt which holds the injector pipe to the intake manifold.

Fig 9: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (RH)

Fig 10: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (RH)
Remove the fuel injector while lifting up the fuel injector pipe.

Fig 11: Placing Fuel Injector