LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Forester XT Limited, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4DOTC) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Battery Ground Cable
    G04988132
  2. Remove the collector cover.
  3. Disconnect the connector from camshaft position sensor RH.
  4. Remove the camshaft position sensor RH from the cylinder head rear.
    Fig 2: Locating Camshaft Position Sensor Connector
    G04998270
  5. Remove the cam shaft position sensor LH in the same way as RH.
scientia non olet · About LEMON Manuals