LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Forester X, Standard >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Periodic Maintenance Services >> Timing Belt >> Replacement >> Non-Turbo Model

Non-Turbo Model

  1. Remove the radiator fan and air conditioner fan. <Ref. to TURBO MODEL , REMOVAL, Radiator Main Fan and Fan Motor. > <Ref. to RADIATOR SUB FAN AND FAN MOTOR . >
  2. Protect the radiator with cardboard and blanket.
  3. Remove the V-belt covers.
    Fig 1: Locating V-Belt Cover Bolts (Non-Turbo Model)
    G04992092
  4. Remove the V-belts. <Ref. to V-BELT . >
  5. Remove the A/C compressor V-belt tensioner.
  6. Using the ST, lock the crankshaft and remove pulley bolt.

    ST 499977100 CRANK PULLEY WRENCH

    Fig 2: Removing Pulley Bolt Using Crank Pulley Wrench ST499977100
    G04997243
  7. Remove the crank pulley.
  8. Remove the belt cover LH.
  9. Remove the front timing belt cover.
  10. Remove the timing belt guide. (MT model)
    Fig 3: Locating Timing Belt Guide Bolts
    G04997244
  11. Turn the crankshaft and align the alignment marks on crankshaft, and left and right cam sprockets with notches of belt cover and cylinder block.

    ST 499987500 CRANKSHAFT SOCKET

    Fig 4: Identifying Alignment Marks On Crankshaft And Cam Sprockets
    G04992099
  12. Remove the belt idler.
  13. Remove the belt idler (No. 2).
    Fig 5: Removing Belt Idler
    G04997246
  14. Remove the timing belt.
  15. Remove the automatic belt tension adjuster assembly.
    Fig 6: Removing Automatic Belt Tension Adjuster Assembly
    G04997247
  16. Install in the reverse order of removal. <Ref. to INSTALLATION , Timing Belt. >
scientia non olet · About LEMON Manuals