RH Side

Release the fuel pressure.
<Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, FUEL. >
Disconnect the ground cable from battery.

Fig 1: Disconnecting Battery Ground Cable
Open the fuel filler flap lid, and remove the fuel filler cap.
Remove the air intake duct and air cleaner case. <Ref. to REMOVAL , Air Intake Duct. > <Ref. to REMOVAL , Air Cleaner Case. >
Remove the power steering pump and reservoir tank.
1. Remove the front side V-belt. <Ref. to REMOVAL , V-belt. >
2. Remove the bolts which hold the power steering pipes onto the intake manifold protector RH.
  NOTE: Do not disconnect the power steering hose.
  
  Fig 2: Locating Power Steering Hoses
3. Remove the bolts which install the power steering pump to the bracket.
  
  Fig 3: Locating Power Steering Pump Bracket Bolts
4. Disconnect the connector from power steering pump switch (A).
  
  Fig 4: Identifying Power Steering Pump Switch Connector
5. Remove the reservoir tank from the bracket by pulling it upward.
  
  Fig 5: Locating Reservoir Tank Bracket
6. Place the power steering pump and tank on the right side wheel apron.
Fig 6: Identifying Power Steering Pump On Right Side Wheel Apron
Remove the spark plug cords from spark plugs (#1 and #3 cylinders).
Remove the fuel pipe protector RH.

Fig 7: Locating Fuel Pipe Protector RH
Disconnect the connectors (A) from fuel injector.
Remove the harness band (B) which holds the engine harness to injector pipe.

Fig 8: Identifying Connectors And Harness Band
Remove the bolt which holds fuel injector pipe onto intake manifold.

Fig 9: Locating Fuel Injector Pipe Bolts - RH Side
Remove the fuel injector while lifting up the fuel injector pipe.