LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Forester X, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Torque Converter Clutch Assembly >> Removal

Torque Converter Clutch Assembly: Removal

  1. Remove the transmission assembly from vehicle body. <Ref. to REMOVAL  AUTOMATIC TRANSMISSION ASSEMBLY. >
  2. Pull out the torque converter assembly and oil pump shaft horizontally.
    CAUTION: Do not scratch the inner surface of the bushing in oil pump shaft.
    Fig 1: Identifying Torque Converter Clutch And Oil Pump Shaft
    G05002574Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the input shaft.
    NOTE: When the torque converter clutch assembly is removed, the input shaft will also come off.
    Fig 2: Identifying Input Shaft
    G05002575Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the clip from torque converter clutch assembly.
scientia non olet · About LEMON Manuals