LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Forester X, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> General Description >> Preparation Tool >> Special Tool

Special Tool

SPECIAL TOOL CHART

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G05002425
 498575400 OIL PRESSURE GAUGE ASSY Used for measuring oil pressure.
G05002426
 498897200 OIL PRESSURE GAUGE ADAPTER Used at the oil pump housing when measuring reverse clutch pressure and line pressure.
G05002427
 498897700 OIL PRESSURE ADAPTER SET Used for measuring the transfer clutch pressure.
G05002428
 498545400 OIL FILTER WRENCH Used for removing and installing the ATF filter.
G04993996
 498277200 STOPPER SET Used for removing and installing the automatic transmission assembly.
G04993997
 41099AC000 ENGINE SUPPORT ASSY Used for supporting the engine.
G04993998
 398527700 PULLER ASSY
  • Used for removing the extension case roller bearing.
  • Used for removing the extension oil seal.
  • Used for removing the front differential side retainer bearing outer race.
  • Used for removing the front differential side retainer oil seal.
G04993999
 498057300 INSTALLER Used for installing the extension oil seal.
G04994000
 498077000 REMOVER Used for removing the differential taper roller bearing.
G05002434
 499247400 INSTALLER
  • Used for installing the transfer outer snap ring.
  • Used with GUIDE (499257300).
G05002435
 499257300 SNAP RING OUTER GUIDE
  • Used for installing the transfer outer snap ring.
  • Used with the INSTALLER (499247400).
G05002436
 499787000 WRENCH ASSY Used for removing and installing the differential side retainer.
G05002437
 398437700 DRIFT Used for installing the torque converter case oil seal.
G04994005
 398487700 INSTALLER Used for installing the front differential taper roller bearing.
G05002438
 398673600 COMPRESSOR Used for removing and installing the clutch spring.
G04994007
 498255400 PLATE Used for measuring the backlash of hypoid gear.
G05002440
 399893600 PLIERS Used for removing and installing the clutch spring.
G05002441
 498247001 MAGNET BASE
  • Used for measuring the gear backlash.
  • Used with the DIAL GAUGE (498247100).
G05002442
 498247100 DIAL GAUGE Used for measuring the gear backlash. Used with the MAGNET BASE (498247001).
G05002443
 498517000 REPLACER Used for removing the front roller bearing.
G05002444
 398623600 SEAT Used for removing the spring of the transfer clutch piston.
G04990256
 28399SA000 DRIVE SHAFT REMOVER Used for removing the axle shaft.
G05002461
 28399SA010 OIL SEAL PROTECTOR Used for installing the axle shaft.
G05002445
 499267300 STOPPER PIN Used for installing the inhibitor switch.
G05002446
 499787700 WRENCH Used for removing and installing the drive pinion lock nut.
G05002447
 499787500 ADAPTER Used for removing and installing the drive pinion lock nut.
G05002448
 398643600 GAUGE Used for measuring the total end play, extension end play and drive pinion height.
G05002449
 498627100 SEAT Used for holding the low clutch piston retainer spring when installing snap ring.
G05002450
 GAUGE 499577000 Used for measuring the mating surface of the transmission to the end face of the reduction gear.
G05002452
 499737000 PULLER Used for removing the reduction driven gear assembly.
G05002453
 499737100 PULLER SET Used for removing the reduction drive gear assembly.
G05002454
 498077600 REMOVER Used for removing the ball bearing.
G05002455
 498937110 HOLDER Used for removing and installing the drive pinion lock nut.
G05002456
 COMPRESSOR 498677100 Used for installing the 2-4 brake snap ring.
G05002457
 498437000 HIGH CLUTCH PISTON GUIDE Used for installing the high clutch piston.
G05002458
 498437100 LOW CLUTCH PISTON GUIDE Used for installing the low clutch piston.
G05002459
 899580100 INSTALLER Used for press-fitting the ball bearing of the transfer clutch.
G04994029
 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER Used for installing the differential side retainer oil seal.
G05002462
 SEAT 398497701 Used for installing the needle bearing.
G05002464
 899524100 PULLER SET Used for bolt only.
  • Used with 499737100 PULLEY SET.
  • Used with 499737000 PULLER.
  1. Puller
  2. Cap
G05002451
 398744300 PISTON GUIDE
  • Used for measuring the contact surface of the transmission mating surface to the multi-plate clutch end face.
  • For VTD model.
G04994033
 18482AA010 CARTRIDGE Troubleshooting for the electrical system.
G04994034
 22771AA030 SUBARU SELECT MONITOR KIT Troubleshooting for the electrical system.
scientia non olet · About LEMON Manuals